Nachdem es nicht gelungen ist mit WPSD mit Brandmeister Koppelung die 9_000_000 Talkgroups auf einen anderen Rechner umzulenken habe ich beschlossen dies selbst zu machen.
Bearbeite die Datei /boot/firmware/config.txt (unter Trixie ist das der korrekte Pfad, nicht mehr /boot/config.txt) :
sudo vi /boot/firmware/config.txtFüge am Ende der Datei diese beiden Zeilen hinzu (falls sie noch nicht existieren):
enable_uart=1
dtoverlay=disable-btDann rebooten und Testen:
admin@DMR-GATE:~ $ ls -l /dev/serial0
lrwxrwxrwx 1 root root 7 Oct 23 15:29 /dev/serial0 -> ttyAMA0
admin@DMR-GATE:~ $ /dev/serial0 zeigt nun auf ttyAMA0
sudo systemctl disable bluetooth
sudo systemctl stop serial-getty@ttyAMA0.service
sudo systemctl disable serial-getty@ttyAMA0.service
sudo systemctl mask serial-getty@ttyAMA0.serviceDas mask ist wichtig, damit der Dienst nicht versehentlich durch Abhängigkeiten wieder aktiviert.
sudo apt update && sudo apt upgrade -y
sudo apt install -y git build-essential cmake libfftw3-dev libmbedtls-dev libcodec2-dev
mkdir ~/projekte
cd ~/projekte
git clone https://github.com/nostar/md380_vocoder.git
cd md380_vocoder && make -j4 && sudo make install && sudo cp md380_vocoder.h /usr/local/include/ && cd ..
git clone https://github.com/nostar/imbe_vocoder.git
cd imbe_vocoder && make -j4 && sudo make install && cd ..
git clone https://github.com/szechyjs/mbelib.git
cd mbelib && mkdir build && cd build
cmake .. && make -j4 && sudo make install
sudo ldconfig
cd ../..
objdump -f /usr/local/lib/libmd380_vocoder.a | head -10Auf dem 32-Bit-Pi 3 sollte dort file format elf32-littlearm und architecture: armv7 stehen.
Enable=0Laut der offiziellen Projektbeschreibung sind DMR2M17 und M172DMR eigenständige Werkzeuge innerhalb des MMDVM_CM-Repositories, die separat kompiliert werden müssen. Die drei externen Abhängigkeiten (md380_vocoder, imbe_vocoder, mbelib) sind bereits installiert
cd ~/projekte
git clone https://github.com/juribeparada/MMDVM_CM.git
# DMR2M17 bauen (DMR → M17)
cd MMDVM_CM/DMR2M17
make -j4
sudo make install
# M172DMR bauen (M17 → DMR, für die Rückrichtung)
cd ../M172DMR
make -j4
sudo make install
sudo apt install -y nlohmann-json3-dev
sudo apt install -y libmosquitto-dev
cd ~/projekte
git clone https://github.com/g4klx/MMDVMHost.git
cd MMDVMHost
make -j4
sudo make install
MMDVM-Host.ini anlegen
sudo mkdir -p /etc/mmdvm
sudo cp ~/projekte/MMDVMHost/MMDVM-Host.ini /etc/mmdvm/
sudo vi /etc/mmdvm/MMDVM-Host.ini
[General]
Callsign=DF9RY
Id=2621341
Timeout=180
Duplex=0
DisplayLevel=1
# ModeHang=10
RFModeHang=10
NetModeHang=3
Daemon=0
[Log]
# Logging levels, 0=No logging
MQTTLevel=1
DisplayLevel=1
FileLevel=0
[MQTT]
Enable=1
Host=127.0.0.1
Port=1883
Auth=0
Username=mmdvm
Password=mmdvm
Keepalive=60
Name=host
[CW Id]
Enable=0
Time=10
# Callsign=
[DMR Id Lookup]
File=DMRIds.dat
Time=24
[NXDN Id Lookup]
File=NXDN.csv
Time=24
[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
UARTPort=/dev/ttyAMA0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335
RXFrequency=433450000
TXFrequency=433450000
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=0
TXOffset=0
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
RSSIMappingFile=RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0
[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
# SendFrameType=0
[D-Star]
Enable=0
Module=C
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
ModeHang=10
WhiteList=
[DMR]
Enable=1
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=0
DumpTAData=0
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
OVCM=0
Protect=0
[DMR Trunking]
Enable=0
ControlChannel=0
ControlChannelAlternateSlot=0
SystemCode=0
RegistrationRequired=0
[System Fusion]
Enable=0
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=0
# ModeHang=10
[P25]
Enable=0
NAC=293
SelfOnly=0
OverrideUIDCheck=0
RemoteGateway=0
SoftId=0
TXHang=5
# ModeHang=10
[NXDN]
Enable=0
RAN=1
SelfOnly=0
RemoteGateway=0
TXHang=5
# ModeHang=10
[POCSAG]
Enable=0
Frequency=439987500
[FM]
Enable=0
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
# 0 - Carrier access with COS
# 1 - CTCSS only access without COS
# 2 - CTCSS only access with COS
# 3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
# ModeHang=10
[D-Star Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0
[DMR Network]
Enable=1 8.2: Inhalt der Datei::
Type=Gateway
LocalAddress=127.0.0.1
LocalPort=62032
GatewayAddress=127.0.0.1
GatewayPort=62031
Jitter=360
Slot1=1
Slot2=1
# ModeHang=3
Debug=0
[System Fusion Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
# ModeHang=3
Debug=0
8.2: Inhalt der Datei::
[P25 Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=32010
GatewayAddress=127.0.0.1
GatewayPort=42020
# ModeHang=3
Debug=0
[NXDN Network]
Enable=0
Protocol=Icom
LocalAddress=127.0.0.1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
# ModeHang=3
Debug=0
[POCSAG Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3 8.2: Inhalt der Datei::
Debug=0
[FM Network]
Enable=0
LocalAddress=127.0.0.1 8.2: Inhalt der Datei::
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0 [General]
Callsign=DF9RY
Id=2621341
Timeout=180
Duplex=0
DisplayLevel=1
# ModeHang=10
RFModeHang=10
NetModeHang=3
Daemon=0
[Log]
# Logging levels, 0=No logging
MQTTLevel=1
DisplayLevel=1
FileLevel=0
[MQTT]
Enable=1
Host=127.0.0.1
Port=1883
Auth=0
Username=mmdvm
Password=mmdvm
Keepalive=60
Name=host
[CW Id]
Enable=0
Time=10
# Callsign=
[DMR Id Lookup]
File=DMRIds.dat
Time=24
[NXDN Id Lookup]
File=NXDN.csv
Time=24
[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
UARTPort=/dev/ttyAMA0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335
RXFrequency=433450000
TXFrequency=433450000
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=0
TXOffset=0
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
RSSIMappingFile=RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0
[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
# SendFrameType=0
[D-Star]
Enable=0
Module=C
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
ModeHang=10
WhiteList=
[DMR]
Enable=1
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=0
DumpTAData=0
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
OVCM=0
Protect=0
[DMR Trunking]
Enable=0
ControlChannel=0
ControlChannelAlternateSlot=0
SystemCode=0 [General]
Callsign=DF9RY
Id=2621341
Timeout=180
Duplex=0
DisplayLevel=1
# ModeHang=10
RFModeHang=10
NetModeHang=3
Daemon=0
[Log]
# Logging levels, 0=No logging
MQTTLevel=1
DisplayLevel=1
FileLevel=0
[MQTT]
Enable=1
Host=127.0.0.1
Port=1883
Auth=0
Username=mmdvm
Password=mmdvm
Keepalive=60
Name=host
[CW Id]
Enable=0
Time=10
# Callsign=
[DMR Id Lookup]
File=DMRIds.dat
Time=24
[NXDN Id Lookup]
File=NXDN.csv
Time=24
[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
UARTPort=/dev/ttyAMA0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335
RXFrequency=433450000
TXFrequency=433450000
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=0
TXOffset=0
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
RSSIMappingFile=RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0
[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
# SendFrameType=0
[D-Star]
Enable=0
Module=C
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
ModeHang=10
WhiteList=
[DMR]
Enable=1
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=0
DumpTAData=0
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
OVCM=0
Protect=0
[DMR Trunking]
Enable=0
ControlChannel=0
ControlChannelAlternateSlot=0
SystemCode=0
RegistrationRequired=0
[System Fusion]
Enable=0
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=0
# ModeHang=10
[P25]
Enable=0
NAC=293
SelfOnly=0
OverrideUIDCheck=0
RemoteGateway=0
SoftId=0
TXHang=5
# ModeHang=10
[NXDN]
Enable=0
RAN=1
SelfOnly=0
RemoteGateway=0
TXHang=5
# ModeHang=10
[POCSAG]
Enable=0
Frequency=439987500
[FM]
Enable=0
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
# 0 - Carrier access with COS
# 1 - CTCSS only access without COS
# 2 - CTCSS only access with COS
# 3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
# ModeHang=10
[D-Star Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0
[DMR Network]
Enable=1 8.2: Inhalt der Datei::
Type=Gateway
LocalAddress=127.0.0.1
LocalPort=62032
GatewayAddress=127.0.0.1
GatewayPort=62031
Jitter=360
Slot1=1
Slot2=1
# ModeHang=3
Debug=0
[System Fusion Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
# ModeHang=3
Debug=0
8.2: Inhalt der Datei::
[P25 Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=32010
GatewayAddress=127.0.0.1
GatewayPort=42020
# ModeHang=3
Debug=0
[NXDN Network]
Enable=0
Protocol=Icom
LocalAddress=127.0.0.1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
# ModeHang=3
Debug=0
[POCSAG Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3 8.2: Inhalt der Datei::
Debug=0
[FM Network]
Enable=0
LocalAddress=127.0.0.1 8.2: Inhalt der Datei::
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0
[Lock File]
Enable=0
File=/tmp/MMDVM_Active.lck
[Remote Control]
Enable=0
RegistrationRequired=0
[System Fusion]
Enable=0
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=0
# ModeHang=10
[P25]
Enable=0
NAC=293
SelfOnly=0
OverrideUIDCheck=0
RemoteGateway=0
SoftId=0
TXHang=5
# ModeHang=10
[NXDN]
Enable=0
RAN=1
SelfOnly=0
RemoteGateway=0
TXHang=5
# ModeHang=10
[POCSAG]
Enable=0
Frequency=439987500
[FM]
Enable=0
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
# 0 - Carrier access with COS
# 1 - CTCSS only access without COS
# 2 - CTCSS only access with COS
# 3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
# ModeHang=10
[D-Star Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0
[DMR Network]
Enable=1 8.2: Inhalt der Datei::
Type=Gateway
LocalAddress=127.0.0.1
LocalPort=62032
GatewayAddress=127.0.0.1
GatewayPort=62031
Jitter=360
Slot1=1
Slot2=1
# ModeHang=3
Debug=0
[System Fusion Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
# ModeHang=3
Debug=0
8.2: Inhalt der Datei::
[P25 Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=32010
GatewayAddress=127.0.0.1
GatewayPort=42020
# ModeHang=3
Debug=0
[NXDN Network]
Enable=0
Protocol=Icom
LocalAddress=127.0.0.1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
# ModeHang=3
Debug=0
[POCSAG Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3 8.2: Inhalt der Datei::
Debug=0
[FM Network]
Enable=0
LocalAddress=127.0.0.1 8.2: Inhalt der Datei::
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0
[Lock File]
Enable=0
File=/tmp/MMDVM_Active.lck
[Remote Control]
Enable=0
# ModeHang=3
Debug=0
[Lock File]
Enable=0
File=/tmp/MMDVM_Active.lck
[Remote Control]
Enable=0
8.3: Testweiser Start:
sudo MMDVM-Host /etc/mmdvm/MMDVM-Host.ini
cd ~/projekte
git clone https://github.com/g4klx/DMRGateway.git
cd DMRGateway
make -j4
sudo make install